# Ion Beam Source L500

> Original page (HTML): https://vaclab.ru/devices/ion_beam_sources/ion-source-ii-500
> Markdown version: https://vaclab.ru/devices/ion_beam_sources/ion-source-ii-500.md
> Manufacturer: LLC "Laboratory of Vacuum Technologies Plus" (LVT), vaclab.ru

Ion source with a 474x42x5 mm hollow rectangular beam and beam current up to 1250 mA.

The principle of operation of the device is to ionize the atoms of the working gas in a direct current discharge in crossed magnetic and electric fields. A discharge is formed when the working gas and the supply voltage are supplied to the region bounded by the two magnetic poles of the cathode and the anode.

The maximum sputtering speed of the target material is achieved when the angle of incidence of the ions is about 30 ° to its surface (the exact value depends on the type of working gas, the target material and the operating voltage).

## Technical specifications

- Voltage, V: 500–5000
- Beam shape: Полый прямоугольный
- Beam width, mm: 42
- Beam thickness, mm: 5
- Ion energy, eV: 250–2500
- Maximal current, mA: 1250
- Gas efficiency, mA/sccm: 9
- Maximal linear current density, mA/cm: 25
- Maximal beam angle, °: 2°
- Beam length, mm: 474
- Maximum permissible voltage, V: 5500
- Weight, kg: 13
- Working gases: любой, не вызывающий осаждения высокоомных слоёв на деталях устройства
- Coolant: дистиллированная вода, 20 % раствор этилового спирта в дистиллированной воде по ГОСТ 6709-72
- Minimum coolant consumption, l/min: 1
- Chamber working pressure range, Pa: 0,001–10
