# Vaporizer -277

> Original page (HTML): https://vaclab.ru/devices/thermal_evaporation/vaporizer-unit-277
> Markdown version: https://vaclab.ru/devices/thermal_evaporation/vaporizer-unit-277.md
> Manufacturer: LLC "Laboratory of Vacuum Technologies Plus" (LVT), vaclab.ru

The evaporator consists of a copper housing with a cooled connection flange KF40, with a spiral-rolled electric heater cable ENK-01-850/80-1,62-1,42-0,2 ( heater) with M14 adapter (vacuum power input).

The groove on top of the housing is designed to install a TC-355 cone crucible (KVPT) made of vacuum-tight corundum with the addition of titanium dioxide, with a volume of 8.5 ml, installed through an indium gasket.

The housing is installed through a seal, a ring KF40 made of viton, with two clamps and screws M6 with nuts (4 sets), the power supply of the electric heater is sealed with a ring FRM 14x3 RO using a nut M14 with a washer.

From the bottom of the crucible, a platinum technical thermometer TPT-R(E)-100P-V4-S-175(M5) (DT) is installed in the center of the housing along the M5 thread with an indium seal.

The evaporator has a protective shield mounted on the housing with screws and nuts M4 without fixing.

Cooling of the evaporator body by means of a closed channel located in the KF40 flange and fittings with pressure nuts for polyurethane tubes with a cross section (6x4) mm.

## Technical specifications

- Maximal power, W: 3500 Vt
- Maximum current: 500 А
- Weight, kg: 2,1 kg.
- Coolant: distilled water, 20
% ethyl solution
alcohol in distilled
water in accordance with GOST 6709-72
- Minimum coolant consumption, l/min: 1,5 l/min.
